- 3K full carbon fiber frame, light and sturdy, with a wheelbase of 95mm
- SP Racing F3 EVO brushed flight controller V2.0 comes with buzzer and supports 1S ( 4.2V ) and 2S ( 8.4V ) voltage input as well as PPM, SBUS, DSM / DSM2 / DSMX signal input
- STM32F303CCT6 + MPU6500, top configuration, guarantees the stable flight of the drone
- FLYSKY 2.4GHz 6CH PPM receiver + FLYSKY FS - i6 6CH transmitter
- AIO FPV camera, 520TVL 120 degree FOV, integrated with 5.8G 32CH 25mW video transmitter
- 8520 coreless motor, compatible with 3.7V input
- Includes 3.7V 600mAh 25C LiPo
Motor: 8520 coreless
Propeller length: 55mm
Battery: 3.7V 600mAh 25C LiPo
Charger: B3 balance charger
Item: SP Racing F3 EVO brushed V2.0
Voltage supply: 1S ( 4.2V ) or 2S ( 8.4V )
Configuration: STM32F303CCT6 + MPU6050
Compatible signal input: PPM, SBUS, DSM / DSM2 / DSMX
AIO FPV Camera
Sensor: 1/4 inch HD CMOS
Operating voltage: 3.3 - 4.5V
Operating current: 140mA at 3.7V
TV system: PAL / NTSC switchable
Pixels: 720 x 576px ( PAL ); 720 x 480px ( NTSC )
Lens angle: 120 degree ( horizontal ); 100 degree ( vertical )
Integrated video transmitter: 5.8G 32CH 25mW
Image transmission distance: about 200m
Antenna gain: 3dBi
FLYSKY 2.4GHz 6CH Receiver
2.4GHz system:Â AFHDS
Operating voltage:Â 5V
Antenna length:Â 30mm
Receive distance:Â 100m
FS - I6, FS - TH9X, FS - GT2B, FS - GT3, FS - GT3B, FS - GT3C etc.
ER9X, OpenTX with FLYSKY tuner etc.
Walkera D7E, D10 with A7105 Module and etc.
FLYSKY FS - i6 Transmitter
2.4GHz system: AFHDS 2A and AFHDS
RF power: less than 20dBm
Code type: GFSK
Low voltage warning: less than 4.2V
Power: 6V - 4 x 1.5 AA ( not included )
RF power: Less than 20dBm
Certificate: CE0678, FCC
|Type: Frame Kit|
Racing Quadcopter Parameters
|CW / CCW: CCW,CW|
| Camera Pixels: 720 x 480px ( NTSC ); 720 x 576px ( PAL )
Video Resolution: 520TVL
Video Standards: NTSC,PAL
|Battery (mAh): 3.7V 600mAh 25C LiPo ( included )|
Dimension and Weight
| Product weight: 0.056 kg
Package weight: 0.994 kg
Product size (L x W x H): 8.00 x 8.00 x 3.00 cm / 3.15 x 3.15 x 1.18 inches
Package size (L x W x H): 34.00 x 23.00 x 12.00 cm / 13.39 x 9.06 x 4.72 inches
|Package Contents: 1 x Frame Kit, 1 x FLYSKY FS - i6 Transmitter, 1 x 3.7V 600mAh 25C LiPo Battery, 1 x USB Charging Cable, 1 x Propeller Puller, 8 x Propeller, 2 x Spare Motor, 1 x Pack of Rubber Bands, 1 x Cable|
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.
Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.