Mini Looper:
The mini loop is designed for guitar or bass for recording. It is a powerful equipment with compact and convenient design. Up to 5 mins and 24bit lossless, uncompressed, professional tone quality recording
LOOP LEVEL KNOB:
Use this knob to control the volume level for the loop playback.
QUICK GUIDE:
Operation | Status | Function | Indicator |
Power on (no loop) | Ready for Rec | Signal true bypass | N/A |
Power on (with loop) | Ready for Play | Signal true bypass | Green flash |
Single press | Ready for Rec | Recording | Red |
Single press | Record | Playback | Green |
Single press | Pause | Playback | Green |
Single press | Playback | Overdub | Green |
Double press | Play/ Rec | Stop | Green flash |
Press and hold | Play/ Rec | Undo/redo | Green fast flash |
Press and hold | Pause | Erase loop | Green fast flash |
Double press and hold | Play/ Rec | Stop & erase loop | Green fast flash |
Record | Running out of memory | Red fast flash | |
Playback | Loop to the beginning | Green and Red lights off once |
While recording, the indication will flash red before running out of the memory. After running out of the memory, the loop will stop and start to playback from the beginning automatically.
- EASE TO USE-
â²Record
ï¿Press the footswitch once. LED indicator shows red, it means SOS looper is rec status.
ï¿Hit footswitch again when you finish your riff. LED indicator shows green, it means SOS looper is in playback status. The riff start to loop continuously. LED indicator flashes every time when reaching the beginning of the loop.
ï¿The maximum loop time is 5 mins.
â²OVERDUB
ï¿Once you have your fist loop, SOS looper would let you overdub your new riff infinitely.
ï¿To overdub over the riff, single press the footswitch when playbacking the loop. Now the LED will turn from green to red, that means SOS looper is in the recording status again and you are good to go.
ï¿Press again when you finishing your loop and SOS looper goes back to playback status.
ï¿SOS looper plays all the overdub riff when in playback status. The new overdubbed riff doesnât affect the lebgth of the original loop and the layers for overdubbung is unlimited.
â²UNDO THE LOOP
ï¿Press and hold the footswitch longer than 1.5s to undo the last riff. There is only one last layer that is able to undo.
ï¿When undoing the loop, LED indicator will flash quickly.
â²REDO THE LOOP
ï¿You might want to redo the undo (twisted i know), press and hold the footswitch again longer than 1.5s, this will redo the loop that you just undo.
ï¿When redoing the loop, LED indicator will flash quickly.
ï¿Stop Rec/Play, double press the footswitch stop recording or stat to play.
ï¿LED indicator will flash in stop stauts to remain you the loop is still stored and it is ready to go.
â²STORE THE CURRENT LOOP
When the power of SOS automatically save the loop from last time. When you power SOS up again, LED indicator shows green and flashes. Which means the loop from last time is still available. Single press will start to play. If you need to record or overdub, please refer to the previous section about them.
Specifications:
Input impedance: 1 megohm
Output impedance: 10 kΩ
Maximum loop length: 5 minutes
Maximum no. of overdubs: Unlimited
Latency: None(analog dry-through)
Input connector type: Standard 1/4" jack-mono/TS
Output connector type: Standard 1/4" jack-mono/TS
Power: External 9V AC power adapter
USB connector type: Micro-B USB
Dimensions: 90(L)x40(W)x49.5(D)mm
Note:
1. Please allow 0.5-1cm differences due to manual measurement.
2. Due to the light and screen difference, the item's color may be slightly different from the pictures.
