Coupons

iFlight ProTek60 Pro HD BLITZ Mini F7 80A 6S 6 дюймов FPV Racing Дрон BNF C DJI FPV Air Unit Поддержка цифровой системы ZCAM / RED Cinema камера - для нормальной камеры BNF-DJI - discount coupon


31.01.2022 iFlight ProTek60 Pro HD BLITZ Mini F7 80A 6S 6 дюймов FPV Racing Дрон BNF C DJI FPV Air Unit Поддержка цифровой системы ZCAM / RED Cinema камера - для нормальной камеры BNF-DJI
BGe0f080 Check Code

Notice: The cinema camera is NOT included in package. Only includ the mount for installing these cinema camera.


Introduction:

Almost as if it came out of the "honey, I shrunk the kids" movie from 1989. Things are getting big!

Let's introduce our latest member to our ProTek family, the all-new iFlight ProTek60 Cinelifter!

We've came a long way with action cameras, offering outstanding quality with little weight and a small footprint. But do you want to get professional or shoot some commercials, maybe get into cinema videography? Well, then you need to step up your game. Those cameras offer higher quality but bigger lenses, higher weight in exchange with all the dynamic range, color profiles and crisp footage you might possibly want.

This rig was designed for a Komodo, Zcam, BMPCC or even a GH5. It fits right onto, safe and tight.

Recommended battery size: 6S 3700mAh - 6S 4400mAh

Estimated flight time: 3-6 min (depending on battery and your take-off weight)


Features:

1.Protected Propellers for indoor and outdoor use, protecting whatever you might bump into from nasty cuts

2.Universal camera mount and accessories for a wide range of cameras to install

3.iFlight ESC Commander PCB // Power distribution board with high capacitance and heat dissipation

4.Single X-Class grade ESC motor drivers for more power and reliability

5.Big size XING2 3110 // The power motors with extreme lift and flight performance

6.GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)

7.Up to 110 km/h // 1.5 kg payload // Total lift off weight up 3.5 kg (recommended max. MTOW)


Description:

Brand: iFlight

Item Name: ProTek60 Pro 6inch FPV Drone

BLITZ F7 Flight Controller

SucceX X80A X-Class ESC

Motor: XING2 3110 1600KV

GPS module: iFlight M8Q-5883-GPS & Compass V2.0 (LINK)

Wheelbase: 282mm

Body Size: 380*351mm

Top and bottom plate spacing: 35mm (aluminum standoff height)

Propeller size: 6 inch

Weight: 1330g (without battery)


FC // BLITZ F7

MCU: STM32 F722

Gyro: MPU6000

Baro: NO

OSD: AT7456E

BEC:5V 2.5A

BlackBox:32MB

UARTs: 6

Smart audio / IRC Tramp VTX protocol supported

WS2812ledStrip: Yes

Bepper: Yes

Firmware Target: IFRC-IFLIGHT_BLITZ_F722

Mounting pattern: 30.5*30.5mm/φ4

Dimensions: 36.5*35mm

Weight: 7.8g


ESC // iFlight ESC Commander PCB (4x SucceX X80A)

MCU: G071

Capacitance per ESC: total 240UF Low ESR

Current Sensor: Yes

Input: 2-8S LIPO

BlHeli32 telemetry: Yes

BEC: No

Supports up to DShot DShot150/300/600/1200/MultiShot/OneShot PWM Drive

Firmware Target: iFlight-BL32-PRO

Weight:8.1g

Dimension: 40*17mm


Package included:

1 x Pre-built and tested ProTek60 Pro

1 x Fullsend X 6S 70C 4400mAh

1 x DJI FPV Air Unit Module + Camera

2 x Albatross LHCP 5.8GHz 100mm SMA FPV Antenna

4 x 6x4x3 Propellers (Color may vary)

2 x iFlight Lipo Strap 20*300mm (Black)

1 x Prop Wrench

1 x XT90 Male to XT60 Female Adapter Wire


BGe0f080 Check Code


Finger-Clamp Pulse Oximeter Medical Finger Blood Oxygen Saturometro Heart De Oximeter Portable Pulse Oximetro Monitor

Interesting video

Latest views New

racer.lt
© 2015 - 2024 racer.lt - All Rights Reserved and belong to their respective owners. (Logos, Photos, Videos and etc.)
Powered by MiReina.lt R.K. Frimen Privacy Policy