Coupons

NVision Junior Racer 75mm FPV Drone RTF - discount coupon


10.09.2021 NVision Junior Racer 75mm FPV Drone RTF
BGANJR75 Check Code

Specification: ( Manual)

Brand: Nvision

Model: Junior Racer 75

Item name: 75mm F4 3S Whoop FPV Racing Drone

Version: RTF

Receiver: Frsky XM+ Recevier

Motor: 1103-8000kv brushless motor

Propellor: GEMFAN 1636 4-blade propellor

Vtx/Antenna: Triangular vtx/with samll stick antenna

Battery: 300mAh 3S 45C battery


Weight: 50.4g (Without battery)

Camery: CADDX Eos2 2.1mm


FC Parameters:

CPU: STM32F411CEU6

Six axis: MPU6000 (SPI connection)

Size: 29mmx29mm

Firmware version: Betaflight TCMM-F411

RC sharing: UART1-RX

OSD: Built-in Betaflight OSD (STM32 controls the OSD chip through SPI in DMA mode)

Receiver: Support FrskyXM/XM+ receiver/Futaba receiver/Flysky receiver/TBS Crossfire

receiver

Support programmable LED such as WS2812

Built-in current sensor

Reserved buzzer interface

Reserve DJI port

Weight: 5.07g


ESC Parameters:

Support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Input voltage: 2S-4SLipo

Continuous current: 12A

Peak current: 20A

Firmware: BLHELI_S

Processor: SILABSEFM8BB21F16G

Motor connector: 1.25mm pin header connector


Description of VTX:

Switchable power includes 0mW, 25mW and 200mW.

This VTX includes SmartAudio function. The flight controller can use the audio cable to

communicate with the video transmitter. It allows the flight controller to know the frequency

used by the VTX and make changes.

This VTX supports PitMode.

Dipole whip high sensitivity antenna. It is mounted to the VTX board durable.

Output power: 0mW, 25mW and 200mW (adjustable)

Power supply voltage: 5V. Does not support direct connection to 1S battery

Weight: 2.0g

Frequency: 5.8GHz 6 frequency band 48 channels, competition frequency band:

5362~5945MH


Operate Junior Racer Whoop Drone

Power On/Off: connect the power cable of to Junior Racer 75 the battery, the power LED,receiver LED and FC LED are on, then the FC LED flashes and the receiver LED turns off. Afterusing, unplug the connection, and all LED will turn off.

Battery: connect the battery to the voltage tester to display the current voltage value of the battery.

Charge: connect the battery to the charger supplied with the adapter or other 5V power. The LED will show red light when charging; the LED will show green light when finishing charging.


Package Included:

1x Junior Racer(with Frsky XM+ Receiver)

1x Radio(support Frsky XM+)

1x fpv goggles

1x B3 Chager

1x 300mAh 3S 45C Battery

2x Lipo Battery Strap

1x Props Removal Tool

2x fpv goggles Dipole 5.8G Antennas

1x GEMFAN 1636 4-blade Propeller(4pcs)

1x Nylon Cable Tie(5pcs)

1x M1.4*6mm Screw(6pcs)





BGANJR75 Check Code


Finger-Clamp Pulse Oximeter Medical Finger Blood Oxygen Saturometro Heart De Oximeter Portable Pulse Oximetro Monitor

Interesting video

Latest views New

racer.lt
© 2015 - 2024 racer.lt - All Rights Reserved and belong to their respective owners. (Logos, Photos, Videos and etc.)
Powered by MiReina.lt R.K. Frimen Privacy Policy