Specification:
Brand Name: Flywoo
Model: Naked Chasers HD
Item Name: 138mm 3 Inch 6S Cinewhoop FPV Racing Drone
Version: BNF-DJI ( Built-in DJI Receiver); Frsky XM+ Receiver (Built-in DJI Receiver & External Frsky XM+ RX)
TBS Crossfire Receiver ( Built-in DJI Receiver & External TBS Crossfire RX)
Drone Wheelbase: 138mm
Material: 3K Carbon Fiber
Top Plate Thickness: 1.5mm
Bottom Plate Thickness: 2.5mm
Weight:299g
GOKU F722 F7 Flight Controller ( Click here to buy replace FC ESC Stack) | Input Voltage: 3-8s MCU: STM32F722RET6 216MHz BEC: 5V 2A/9V 2A Mounting Hole: 30.5x30.5 ( M3) |
50A BLHELI_32 4In1 ESC |
|
ROBO 1507 2900KV Brushless Motor ( Click here to buy replace motor separately) | Brand: Flywoo Item Name: RB 1507 Motor Stator diameter: 15mm Stator height: 7mm Kv: 2900KV Bearings: NSK Wire Length: 150 mm Shaft size: M5 Mounting Screw Pattern: 12Ã12 mm Input Voltage: 2-6S Weignt:15.6g |
| Chasers 3045 3-Blade Propeller | Item Name: 3045 3x4.5 3 Inch Tri-blade Propeller Quantity: 2 CW & 2 CCW |
DJI Air Unit HD Digital System ( More Details) | SPECIFICATION Operating Frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm Low Latency Mode (720p/120fps): <28 ms High-Quality Mode (720p/60fps): <40 ms Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km Video Format: MP4 (Video format: H.264; Audio format: ACC-LC) I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot Operating Temperature Range: 32° to 104°F (0° to 40°C) Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 x 21.1 x 20.1 mm Weight: 8.2 g Built-in DJI Receiver, Compatible with DJI FPV Remote Controller |
| Optional Receiver | BNF-DJI Version: Built-in DJI Receiver Frsky XM+ Receiver Version: Built-in DJI Receiver and with External Frsky XM+ Receiver TBS Crossfire Receiver Version: Built-in DJI Receiver & with External TBS Crossfire Receiver |
| Recommend Lipo Battery ( NOT Included) | Recommend 6S 850-1050mAh Lipo Battery w/ XT60 Plug |
Features:
- Equipped with GOKUF722 + 50A BLHELI32 ESC Stack
- Bind and Fly Built and test flown
- Equipped with the DJI FPV Air Unit -Bind and Fly
- Buttery-smooth 720p 120fps FPV feed
- Pre-tuned with smooth racing Freestyle settings
- Full 3K Carbon Fiber airframe with chamfered arms
- Equipped with ROBO1507 2900KV Motors
- Integrated Bluetooth configuration module
- 3-6S Lipo compatibility
Package Included:
1x Flywoo Naked Chasers HD Quadcopter
1x DJI Digital HD FPV Air Unit
2x Flywoo Lipo Strap
2x Chasers 3045-3 Propeller(2 CW & 2 CCW)
4x ROBO1507 2900KV Motors
1x Bluetooth Module
1x WS2812LED&Buzzer board
1x Chasers EVA Bumper Set (You can install Form duct for your Chasers)
