Main Features:
â This system has the stronger sounds synthesis and high-efficiency amplifier.
â Equip with the fantastic loudspeaker box which can bring to the perfect and simulated effect.
â Built-in variety of sounds simulation, up to 19 groups.
â The firmware can be updated via the computer software to increase the quantity of sound.
Specifications:
Version: 2.0
Input voltage: 4.5 - 6.0V
Speaker power supply: 6 - 26V
Max. power: 30W
Cable: 20cm, 2.0 JST - XH connector
Attention:
- Use glue to stick the loudspeaker ( positive ) in the inside of the aircraft, and make sure it won't fall off.
- Please assemble it according to the manual strictly and keep it stable and safe.
- Alarm in low voltage: open the low voltage alarm, when the voltage lower than setting the lowest voltage, then the first LED and the third LED will flash ( blue and red LED flash ).
- To avoid damaging the loudspeaker, please turn down the sounds to minimum when use it for first time or re-setting.
- To make the perfect simulated effect, please do not put the objects which have strong distribution around the loudspeaker.
- It should be calibrated the controller when use it in the first time or change to anther controller.
â This system has the stronger sounds synthesis and high-efficiency amplifier.
â Equip with the fantastic loudspeaker box which can bring to the perfect and simulated effect.
â Built-in variety of sounds simulation, up to 19 groups.
â The firmware can be updated via the computer software to increase the quantity of sound.
Specifications:
Version: 2.0
Input voltage: 4.5 - 6.0V
Speaker power supply: 6 - 26V
Max. power: 30W
Cable: 20cm, 2.0 JST - XH connector
Attention:
- Use glue to stick the loudspeaker ( positive ) in the inside of the aircraft, and make sure it won't fall off.
- Please assemble it according to the manual strictly and keep it stable and safe.
- Alarm in low voltage: open the low voltage alarm, when the voltage lower than setting the lowest voltage, then the first LED and the third LED will flash ( blue and red LED flash ).
- To avoid damaging the loudspeaker, please turn down the sounds to minimum when use it for first time or re-setting.
- To make the perfect simulated effect, please do not put the objects which have strong distribution around the loudspeaker.
- It should be calibrated the controller when use it in the first time or change to anther controller.
Specification
General |
Brand: G.T. Power
Type: Sound Light Controller |
|---|---|
Dimension and Weight |
Product weight: 0.1500 kg
Package weight: 0.1800 kg Product size (L x W x H): 6.63 x 4.40 x 1.48 cm / 2.61 x 1.73 x 0.58 inches Package size (L x W x H): 20.00 x 12.00 x 4.00 cm / 7.87 x 4.72 x 1.57 inches |
Package Contents |
Package Contents: 1 x Sound System Control Module, 2 x Speaker, 2 x ESC Connect Cable, 1 x USB Cable, 1 x Power Cable, 2 x 5mm White LED, 2 x 5mm Red LED, 1 x 5mm Green LED, 1 x Pack of Accessories, 1 x English Manual |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
