Features:
• High power, high current, high-performance power conversion circuit
• Advance synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%
• Cooling fan will start/stop automatically according to the internal temperature and charge/discharge power, and protect the charger from overheating
• Convenient set of 10 battery profiles that can be saved for later use
• 2x16 backlit LCD screen that provides rich information including active mode, current, voltage, total charge(mah), charging time and temperature etc
• Various charging/discharging settings and cycles to meet a wide range of customer needs
• Up to 1000W unique regenerative discharge capability
• Unique lithium battery expanding discharge program. When you connect the external capacity resistance, you can use it as the maximum discharge power capacity-1200W (@40V/30A)
• Lithium battery cell monitor looks at the per-cell voltages, battery temperature and process time during charge/discharge
• Battery internal resistance measurement
• The Reaktor charger has protection for reversed polarity (input or output), low input voltage, battery temperature, charging capacity and time overrun.
• The charger has a 16Mbit flash storage, which can log offline charge and discharge data in 36 hours
Specification:
Input voltage range: 5.0~36.0VDC
Charging current range: 0.05~30.0A
Discharging current range: 0.05~30.0A
Maximum charge power capacity: 1000W@input voltage 23V & 500W@input voltage12V
Maximum discharge power capacity: 80W
Maximum regenerative discharge power capacity: 1000W
Maximum external discharge power capacity: 1200W@40V/30A
Current drain for balancing: < 500mA
Balance accuracy: < 10mV
Lithium (LiPo/Lilo/Life) battery cell count: 1~10 series (In non-balance mode, LiFe cell count can be expanded to 12S)
NiCd/NiMH battery cell count: 1-25 series
Pb battery cell count: 1~18series (2~36V)
Log files storage: 16Mbit (31 hours)
Battery setup memories: 10
Intelligent temperature control: Yes
PC connect: USB Port
Weight: 870g
Dimension: 143x146x60mm
Included:
1 x Thunder 1030 charger
1 x Alligator Clip Charge Lead
1 x Charge Lead - No Connector
1 x Large Clip Set
1 x Manual
