Notice: It is DIY Version. Comes unassembled.
Need BUILD by yourself.
Specification:
Brand Name: iFlight
Model: 136RS
Item Name: 136mm F4 4S DIY 3 Inch FPV Racing Drone
Version: PNP ( Without Receiver, Lipo Battery, Radio Transmitter)
Drone Wheelbase: 136mm
Material: 3K Carbon Fiber + 3D TPU Canopy
Arm Plate Thickness: 3mm
Drone Net Weight: Around 60.5g
| iFlight SucceX Micro F4 V1.5 Flight Controller | MCU: STM32F411 Input Voltage 2-4S Lipo Gyroscope: MPU6000 Betaflight OSD: YES Blackbox FLASH: 8MB BEC 5V 2.5A cont. Firmware: IFF411_PRO(IFRC) Size: 21x21mm Mounting Holes: 16x16mm (M3) Weight: 2.5g -2x UART ports -4x motor outputs F.PORT protocol RX input support, telemetry NOT supported. |
| iFlight XING-E 1104 4200KV Brushless Motor | Model: XING-E Item Name: 1104 4200KV / 8300KV 2-4S Brushless Motor KV: 4200KV Cable Length: 60mm Quantity: 4 PC Shaft Diameter: 1.5mm Weight: 5g |
| iFlight SucceX Micro 15A V2.1 4in1 Brushless ESC | Firmware: G-H-30 BLS 16.7 Input Voltage : 2-4S LIPO Continuous Current: 15A MCU: BB21F16G BEC: NO Current sensor: yes ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc. Size: 30x22mm Mounting hole 16*16mm Weight: 3.6g |
| iFlight Nazgul T3020 3 Inch 2-Blade Propeller | Model: Nazgul T3020 Material: polycarbonate Mounting: 1.5mm center hole Color: Transparent Green Quantity: 4 CW & 4 CCW Hub Thickness: 5mm Weight: 0.9g/PC |
| iFlight 5.8G SucceX Micro 200mW VTX | Power: PIT/25/100/200mW Antenna interface: IPEX (UFL) VTX protocol: IRC Tramp Size: 17x27mm Mounting Holes: 16x16mm Weight: 1.6g |
| Caddx.us Turbo Eos V2 1200TVL FPV Camera | Brand Name: Caddx.us Model: Turbo Eos V2 Item Name: 1200TVL 2.1mm Lens 16:9 FPV Camera NTSC |
| Lipo Battery ( NOT Included) | Recommend 4S 450mAh 75C Lipo Battery XT30 Plug |
Features:
- 16x16mm SucceX Micro F4 Flight tower system
- The lightest 1104 brushless motor on the market with double ball bearings
- Light, Powerful and smooth configuration
- 3mm bottom carbon fiber frame
- Compatible 4S Lipo/LIHV
Package Included:
1x TurboBee 136RS Bottom Plate
1x 3D Printing TPU Canopy ( Blue Color)
1x iFlight SucceX Micro F4 V1.5 Flight Controller Board
1x iFlight SucceX Micro 15A V2.1 4in1 Brushless ESC Board
4x iFlight XING-E 1104 4200KV Brushless Motor ( Black Color)
1x iFlight 5.8G SucceX Micro 200mW VTX Module
1x Caddx.us Turbo Eos V2 1200TVL FPV Camera
4x iFlight Nazgul T3020 3 Inch 2-Blade Propeller CW ( Transparent Green Color)
4x iFlight Nazgul T3020 3 Inch 2-Blade Propeller CCW ( Transparent Green Color)
2x iFlight 10x130mm Battery Strap
1x 25V 220UF 6*11mm Capacitor
1x XT30U Connector Cable (18AWG)
1x bag of Screws
