Description:
Jumper X73S is the tiniest brushless FPV racing drone since its wheelbase is only 73mm. It has 1103 10000KV high RPM motors that rotate furiously, enabling it to fly past like a gust of wind. You only need a 1S LiPo to power it, and bind before takeoff.
Main Features:
- Only has a wheelbase of 73mm, and weighs 34g after the installation of propeller guard
- High-performance Naze32 6DOF flight controller, configurable via BetaFlight firmware
- 1103 10000KV brushless motors and strong propellers provide you with a stable and high-speed flight
- BLHeli 3.5A brushless ESCs help you get better control of the rotation of motors
- 600TVL HD PAL camera and 5.8G 32CH 25mW AV transmitter bring low image noise and good connectivity
Specifications:
Aircraft
Wheelbase: 73mm
Flight controller: Naze32
Firmware: BetaFlight
Brushless motor: 1103 10000KV
ESC: BLHeli 3.5A ( supports 1S LiPo )
AV transmitter: 5.8G 32CH 25mW
Weight: 34g
Takeoff weight: less than 43g
Camera
Sensor: 1/4 inch HD
Resolution: 600TVL
Min.Illumination: 0.5 lux
SNR: more than 48dB
GAMMA: 0.45
TV system: PAL
Refresh rate: 50fps
Shutter speed: 1/50 to 1/100,000s
Working temperature: -40 to +85 Deg.C
White balance: auto
Video output: 1Vp-p 75 ohm
Synchronous system: internal synchronization
Receiver Options:
FrSky D8 receiver
DSMX receiver
Futaba S - FHSS receiver
Note:
It is recommended to use 1S 450mAh 25C LiPo battery as the power supply to have 5 - 6 minutes' flying.
Specification
General |
Brand: Jumper
Type: Frame Kit |
|---|---|
Racing Quadcopter Parameters |
Wheelbase: 73mm |
Motor |
Model: 1103
KV: 10000 CW / CCW: CCW,CW |
Camera |
Video Resolution: 600TVL
Video Standards: PAL |
Electronic Speed Controller |
Firmware: BLHeli |
Dimension and Weight |
Product weight: 0.034 kg
Package weight: 0.205 kg Package size (L x W x H): 16.00 x 16.00 x 8.00 cm / 6.3 x 6.3 x 3.15 inches |
Package Contents |
Package Contents: 1 x Drone, 1 x Receiver, 1 x Propeller Guard, 1 x Connection Cable, 1 x Battery Power Adapter ( with XT60 Plug ), 1 x Other Accessory |
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
