Specification:
Brand name: Eachine
Item name: Wizard X220HV 6S RC FPV Racing Drone RTF
Drone weight(without battery): 489g
Battery weight: 161.7g
Package weight: 1700g
Package Size: 245*280*200mm
| Item | Specification |
|
Wheel base: 220mm
Upper plate thickness: 2.0mm
Frame arm thickness: 5.0mm
Bottom plate thickness: 3.0mm
X plate thickness: 1.5mm
Camera side plate thickness: 1.5mm
Camera standoffs: M3*28mm 1 PC
Frame standoffs: M3*20mm 8 PCS
|
|
| Jumper T8SG V2.0 Plus |
Color: Carbon fiber
Transmission frequency: 2.400GHZ-2.7GHZ
Transmitter Module: Four in One High Frequency Module (CC2500 CYRF6936 A7105 NRF2401)
Transmit power: maximum 22dbm (transmit power adjustable)
Antenna gain: 2db (detachable antenna, easy modification)
Working current: [email protected]
Working voltage: DC4.5-DC18V (factory with 4 x AA battery box, lithium battery recommended 2s balanced head line, batteries not included)
Remote control distance:> 2km @ 22dbm
Open source firmware:
Number of channels: up to 12 channels (depending on the receiver)
Display: 2.42-inch OLED display, 128 * 64 resolution
Rocker way: non-contact 3D space vector Hall joystick
JR/FrSKY compatible module bay on rear side
Upgrade method: USB online upgrade
Support Protocols:
* Walkera full range
* DSM2/X full range
* Flysky and Flysky 2A
* FrSKY
* FUTABA s-fhss full range
* WL Toy series, Hubsan series, Esky series and many more (Currently a total of more than 40 supported protocols)
Uses open source software with continued support and development, adding new protocols regularly.
Simulator mode: 3.5mm standard ppm output
USB output.
Size: 158 x 150 x 58mm
Weight: 338g (without battery)
|
| Receiver (Optional) |
Frsky XSB Receiver
Channel: XSR-16CH(1-16CH from SBUS channel,1-8ch from CPPM Channel)
Dimension: 26 x 19.2 x 5 mm
Weight: 3.8g
Operating Voltage Range: 4.0~10V
Operating Current: 100mA@5V
Firmware Upgradeable
Flysky X6B i-BUS 2.4GHz 6CH Receiver
Channels: 6(PWM), 8(PPM), 18(i-BUS)
Model Type: Multi-Rotor
RF Range: 2.408-2.475 GHz
Brand Wigth: 500KHz Number of bands: 135
RF Power: No more than 20 dBm
RX Sensitivity: -95dBm
2.4GHz protocol: AFHDS 2A
Modulation Type: GFSK
Stick resolution: 1024 Low voltage alarm: Yes DSC port: PPM/PWM/i-BUS Antenna Length: 93mm (Dual Antenna)
Power input: 4.0-8.4V
On-line Update: Yes(Wireless)
Range: >300m
Weight: 4.5g
Size: 36*22*7.5mm
i-BUS Port: Yes
Certificate: CE0678, FCC ID: N4ZX6B00
|
| 2306 1650KV 3-6S Brushless Motor |
Motor KV: 1650 RPM/V
Idle current(Io/10V): 1.05A
Lipo cell: 3-6S
Weight: 35g
Max continuous current: 36A
Max continuous power: 860W
Max thrust: 2350g
Configu-ration: 12N/14P
Stator diameter: 23mm
Stator thickness: 6mm
Motor diameter: 29mm
Motor body length: 18.4mm
Overall shaft length: 32.9mm
Prop adapter shaft: M5
Bolt holes spacing: 16mm
Bolt thread: M3
Propeller: 5-6 inch
|
| 45A 4 In 1 BLHeli_S ESC 2-6S |
Integrated PDB
Working voltage: 2-6S Lipo
Continuous working current: 4*45A
Peak current: 4*50A (6S)
Main control chip: 48Mhz EFM8BB2
Firmware: BLHeli_S Supports Dshot600
MOS: 5*6
|
| Customized F4 Flight Controller Built-in OSD |
Main control chip: STM32F405
Sensor: MPU6000 6 axes
Power supply: 5V
Integrated OSD
LC filter on board
Supports BetaFlight / inva running firmware
|
| Foxeer Arrow Mini Pro 2.5mm 650TVL Camera |
Solution: 1/3" Sony SUPER HAD II CCD + Nextchip 2040 DSP
Pixel: PAL: 976(H)x494(V)
TV system: PAL
Resolution: 600TVL(color) 650TVL(B&W)
Synchronization: internal
Min.illumination: 0.01Lux
WDR: support
OSD programming board: support
White Dot repair: support
DNR: 2D DNR
Camera title: support
Image adjustment: support
OSD: Edit name, power, flying time
Input power: 5-40V
Storage temperature: -40â~60â
Working temperature: -10â~50â
Power consumption: 70mA
Low voltage alarm: support
Preset mode: DEF, VIVID, SUNNY, CLOUDY, LED TR, USR1
Size: 21.8x21.8mm
Weight: 8.7g(excluding bracket)
|
| 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable |
Output power and transmission distance: ≥0.5km@25mW, ≥1km to 200mW, ≥2km to 600mW
Transmission power: 0mW / 25mW / 200mW / 600mW
Full video format: NTSC / PAL
Input voltage and power dissipation: 7V ~ 24V, + 12V / 260mA @ 600mW
Size: 36*36*6mm
Weight: ≤ 7g (excluding antenna)
With output power self-check function.
Nixie tube SCAN: frequency point (1-8), frequency band (AE), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)
|
| SpeedyBee bluetooth Module |
Support Betaflight configurator
Speedybee App: iOS 10.0+; iPhone 4S, iPad3; Androd 4.3+
Output power: 0dBM
Sensitivity: -94dBM
External interface: BROADCAST SWITCH, TX, RX, 3-5V DC Input, GND
Transmission speed: Bidirectional 1K/S
bluetooth protocol: bluetooth Specification V4.0 BLE
Transmission distance: 30 meters
Frequency range: 2400MHz-2483.5MHz (2.4G ISM Band)
Baud rate: 2400, 4800, 9600, 14400, 19200(default), 28800, 38400, 57600, 76800, 115200, 230400
Working voltage: 3.3V-5.0V
Working current: 8.3mA-10mA
Weight: 1.4g
Size: 27*15*4.5mm
|
| 110DB BB Alarm Buzzer |
Working voltage: 5V
Standby battery: lipo 4.2V 100mah
Loudness: 110DB
Size: 36 * 36mm
Weight: 8g
|
| Dalprop Cyclone T5046C propeller |
Size: 5046 5x4.6
Mounting hole: 5mm
Color: transparent purple & transparent white
Quantity: 4 pairs (2 pairs of transparent purple + 2 pairs of transparent white)
|
| Lipo Battery |
6S 1000mAh 80C Size: 62x33x38mm Weight:161.7g |
Note:
Dear customers,
Please don't flash the flight controller to the latest firmware, for its factory default command please Click Here.
X220HV English Manual
Package included:
1 x X220HV frame kit
1 x Jumper T8SG V2.0 Plus Transmitter
1 x Compatible FrSky XSR Receiver
Compatible Flysky X6B Receiver (optional)
1 x 6s 1000mAh 80C Battery
1 x Jumper T8SG V2.0 Plus Transmitter
1 x Compatible FrSky XSR Receiver
Compatible Flysky X6B Receiver (optional)
1 x 6s 1000mAh 80C Battery
2 x 2306 1650KV brushless motor CW
2 x 2306 1650KV brushless motor CCW
1 x 4 IN 1 45A BLHeli_S ESC
1 x Customized F4 flight controller Built-in OSD
1 x Foxeer arrow mini pro 2.5mm 650TVL camera
1 x 5.8G 40CH 0mW/25mw/200mw/600mw VTX Switchable
1 x 110DB BB alarm buzzer
1 x SpeedyBee bluetooth module
1 x 45mm RP-SMA male antenna RHCP
2 x 200*20mm battery strap
1 x 30° camera mount compatible with Runcam 3 3S Gopro session
2 x Dalprop cyclone T5046C transparent white CW
2 x Dalprop cyclone T5046C transparent white CCW
2 x Dalprop cyclone T5046C transparent purple CW
2 x Dalprop cyclone T5046C transparent purple CCW
10 x 2.5*100mm nylon strap black
(Package doesn't include Runcam 3S, the Runcam 3S on the pictures for reference only.)
(Package doesn't include Runcam 3S, the Runcam 3S on the pictures for reference only.)
