FrSky X-Lite - remote for all needs


 

 

The Frsky Taranis X-Lite TX has the size and shape of a gaming controller like XBox and similar PS4. It’s much smaller (2x actualy) than traditional radio transmitters, the compact size let's you take it almost anywhere.

The radio and accessories come in a really nice soft shell case.

 

You can choose from two colors, fancy Red and Black

 

There is no neck strap hook on Frsky X-Lite transmitter (sadly), well it is quite small size, and the targeted audience are “thumber's”. So that is not a big problem for them as X-lite has rubberized handles what provides quite a solid hold.

X-Lite Specification

  • 128×64 LCD Screen (same resolution but smaller than the one in the Taranis Q X7)
  • Powered by 2x 18500 Li-ion batteries (you can print an adapter for 18650)
  • Micro USB connection for simulators
  • Micro SD card slot
  • Headphone Jack
  • Smartport Output
  • Internal iXJT RF module, with Internal antennas as well as RP-SMA connector for external antenna
  • Haptic vibration feedback.

 

Ergonomics

Compared to the Taranis QX7, you can see the X-Lite is considerably smaller, but not as small as I originally thought. from first images what was leaked (RcGroup) It’s very comfortable and natural to hold, just like holding an XBox controller if you are a gamer (you will love it). Has detachable external antenna wich makes it even more "take it anywher" remote. Range with standard internal antenna is similar to X9D range and with external antenna litle bit bigger range (Tested range with wing was 5.79 KM!)

 

Gimbals

Gamers and thumbers (people who hold the sticks only with their thumbs) are going to love this radio. But the stick end (tip) feels a bit too small and not grippy enough, maybe I will change out the stickends to something better in the future when they become available.

It might work for some pinchers (people who hold the sticks with both their thumbs and index fingers). But if you have big hands, it can feel a little awkward to hold due to the small body.

The Taranis X-Lite has pre-installed “M12 Lite hall sensor gimbals”. Generally, Hall sensor gimbals are said to be more precise and durable than traditional gimbals using potentiometers. The gimbals on the X-Lite feel similar to the hall gimbals on the QX7S and X9D, though the output signal is different.

X-Lite’s gimbals have PWM output, which means on paper, they can be more accurate than the hall effect gimbals used in the Taranis X9D+ and QX7 (which have analogue outputs, 3.3V voltage level).

 

 

 

 


 

 

Stick Height Adjustment

You can adjust the height of the stick slightly (about 5mm) by screwing the little bolt in or out in the stickend. You can buy aftermarket sticks with M2 they will work fine.

 

Switches

The Taranis X-Lite TX features two 3-position switches (longer ones), two 2-position switches (shorter ones) and two sliders (but they have no centering notches). The number of switches are more than enough for multirotors, you can assign flight modes, and activating other functions.

The switches are actually in very good positions. You can easily flip them while holding the sticks. They are quite stiff, it’s pretty unlikely to flip them by accident.

 

Ports and Connectors

All connections are on the back of the radio:

Micro SD card slot, which stores all the OpenTX files and models data
3.5mm headphone jack for audio output
Micro USB port
SmartPort (S.Port), for flashing receiver firmware

 

 

Menu, Operation and OpenTX

The screen has the same resolution as the one in the QX7, but it’s nicer to look at because it’s smaller and feels less pixelated. The backlight is bright enough to see clearly under sunlight.

If you are coming from the Taranis X9D or X9D+ or QX7, it will take you sometime to get used to the X-Lite. The buttons are different, and menu has been slightly modified. But OpenTX is more or less the same in terms of features and where things are.

For completely new people, this makes no difference in terms of learning curve. Don't forget to update firmware as there is difference with final version and X-lite shipped version of OpenTx, main difference in cross joystick (it will trim the right way).

Initial Setup and How to Use

You can do pretty much everything with the 5-way joystick.

  • Center press for enter and confirm. Press up, down, left and right to navigate the menu
  • Hold left to access Radio Setup
  • Hold right to access Model Setup
  • Hold up for statistics
  • Hold down for telemetry page
  • The cancel button is right below the joystick.

 

 

Final thoughts

The FrSky X-Lite is a really great product, very well made, with small really small minus, missing the neck strap and rare 18500 batteries without charging port ;( 

Pro’s

  • Stylish, compact and portable - XBox like radio
  • One of the highest quality radios from Frsky for the really low price
  • Clever way of adjusting stick tension and removing throttle spring and easy MODE switch
  • Good for thumbers
  • Supports long range systems: R9M-Lite (native) and OpenLRS, Crossfire etx (if you don’t mind DIY mods)
  • Internal antenna and allows external antenna out of the box easy swap!

Con’s

  • There is no built-in charger
  • You can’t adjust stick tension for the horizontal sticks (yaw and roll on mode 2)
  • Not as ergonomic for pinchers, or people with big hands
  • No neck strap hook ;/
  • Rare 18500 batteries
  • No charging port (you can make USB charging slot if you don't mind DIY mods)

 

Find your FrSky X-Lite here: https://api.racer.lt/6yc6



Back

Add Comment




Latest news

See all




Finger-Clamp Pulse Oximeter Medical Finger Blood Oxygen Saturometro Heart De Oximeter Portable Pulse Oximetro Monitor

Interesting video

Latest views New